 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C&K E Series Sealed Miniature Rocker and Lever Handle Switches Features/Benefits * Sealed against solder and cleaning Typical Applications * Telecommunications process contaminants * Instrumentation * ESD Resistance--all actuator options * Computers & peripherals * Rocker, case & bushing UL 94V-0 * RoUS compliant Models Available Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS @125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models): 5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page H-37 for additional ratings. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CONTACT RESISTANCE: Below 10 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 min. ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator options: 15,000 V DC max. @ sea level, actuator to terminals. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30C to 85C. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). Materials CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). ACTUATOR: Nylon, black standard, internal o-ring seal standard with all actuators. FRAME: Spring steel, black standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. ACTUATOR PIVOT & MOUNTING BRACKET: Nylon. ACTUATOR PIVOT RETAINER: Stainless steel. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page H-37 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff: Nylon standard, aluminum available, consult Customer Service Center. NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages H-26 through H-39. For additional options not shown in catalog, consult Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Rocker Switch Function E101 SP On-None-On E103 SP On-Off-On E105 SP Mom.-Off-Mom. E107 SP On-Off-Mom. E108 SP On-None-Mom. E201 DP On-None-On E203 DP On-Off-On E205 DP Mom.-Off-Mom. E207 DP On-Off-Mom. E208 DP On-None-Mom. E211 DP On-On-On E213 DP On-On-Mom. E215 DP Mom.-On-Mom. E301 3P On-None-On Actuator J1 .531 long rocker J2 Lever J3 .906" long rocker J11 Rocker with frame J21 Lever with frame J50 .362" long rocker J60 Lever J90 Lever Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole V3 .460" high, V-bracket V4 .630" high, V-bracket V5 Vertical right angle, PC thru-hole V6 .460" high, V-bracket V7 .630" high, V-bracket V8 .953" high, V-bracket V21 .555" high, V-bracket, snap-in V31 .460" high, V-bracket, snap-in Contact Material B Gold K Gold, tin-lead P Gold, matte tin Q Silver M Silver, tin-lead S Silver, matte-tin G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte-tin Seal E Epoxy Actuator Color 2 Black Frame Color 3 Red 2 Black NONE No frame color required Metal Frame Color (J11, J21 Actuators) 2 Black H H-26 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side ON ON MOM. ON ON NONE OFF OFF OFF NONE ON ON MOM. MOM. MOM. C&K marking on opposite side N/A SCHEMATIC E101 E103 SP E105 E107 E108 2-3 OPEN 2-1 N/A SPDT SPDT Part number shown: E101J1ZBE2 Terminal Nos. For Reference Only ON ON MOM. ON ON ON ON MOM. NONE OFF OFF OFF NONE ON ON ON ON ON MOM. MOM. 2-3,5-6 2-1,5-4 N/A MOM. ON MOM. MOM. 2-3,5-4 DPDT OPEN N/A E201 E203 E205 E207 DP E208 E211** E213** E215** DPDT Rocker Part number shown: E201J1ZBE2 MOM. = Momentary All models Terminal Nos. For Reference Only ** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog. with all options when ordered with G, L, M or Q contact material. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-27 www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches SWITCH FUNCTION POS. 1 SWITCH FUNCTION POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC 3P E301 ON NONE ON 2-3,5-6,8-9 N/A 2-1,5-4,8-7 3PDT 3PDT Terminal Nos. For Reference Only Part number shown: E301J1ZBE2 MOM. = Momentary ** Wiring for 3-way switch, see Technical Data section of this catalog. ACTUATOR COLOR All models with all options when ordered with G, L, M or Q contact material. ACTUATOR-PANEL REAR MOUNT OPTION CODE ACTUATOR COLOR BLACK RED ACTUATOR J1 LEVER 2 3 Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each--mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page H-37. Hardware available seperately, see Technical Data section of this catalog. J1, J2 actuators available with C, Z or Z3 terminations. J2 PANEL MOUNTING J1 & J2 Actuators LEVER Rocker H H-28 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches ACTUATOR COLOR ACTUATOR-REAR MOUNT J11 ROCKER WITH FRAME ACTUATOR FRAME COLOR OPTION CODE ACTUATOR COLOR BLACK RED 2 3 OPTION CODE FRAME COLOR BLACK 2 NOTE: This option has reduced anti-static capability. J21 LEVER WITH FRAME Actuator finish: Matte, frame finish: gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Internal o-ring actuator seal standard. Actuators & frames available separately, see page H-37. Hardware available seperately, see Technical Data section of this catalog. N. J11 & J21 actuators available with C, Z & Z3 terminations. PANEL MOUNTING NOTE: This option has reduced anti-static capability. ACTUATOR COLOR ACTUATOR-PC MOUNT ACTUATOR J1 ROCKER OPTION CODE ACTUATOR COLOR BLACK RED 2 3 J2 LEVER Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each--mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page H-37. Hardware available seperately, see Technical Data section of this catalog. J1, J2 actuators available with A, A3, AV2, AV3, V2-V61 terminations. Rocker H Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H-29 www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches ACTUATOR COLOR ACTUATOR-PC MOUNT ACTUATOR J3 ROCKER OPTION CODE ACTUATOR COLOR BLACK RED 2 3 Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each--mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page H-37. Hardware available seperately, see Technical Data section of this catalog. J3 actuators available with AV2, AV3 & V2-V61 terminations. Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J50, J60 & J90 actuators available with A, AV2, AV3, V2 - V61 terminations. J50 ROCKER J60 LEVER J90 LEVER TERMINATIONS Z SOLDER LUG C PC THRU-HOLE PC MOUNTING Rocker SPDT thru 3PDT Not available with K, L, P, S, & R or M contact materials. Available actuators, see page H-37. SPDT thru 3PDT H H-30 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS Z3 QUICK CONNECT SPDT thru 3PDT Not available with K, L, P, S, & R or M contact materials. Available actuators, see pages H-28 thru H-30. Mating quick connector available; order part number 530100000, page H-38. A RIGHT ANGLE, PC THRU-HOLE E101J1ABE2 Horizontal Actuation SPDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE NOTE: Not available with J3, J50, J60 and J90 actuators. Available actuators, see pages H-28 thru H-30. Terminal bend radii and lead-in manufacturing option. NOTE: PC mounting pattern must clear switch support leg. A RIGHT ANGLE, PC THRU-HOLE E201J1ABE2 Horizontal Actuation DPDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Rocker NOTE: Not available with J3 actuator. Available actuators, see pages H-28 and H-30. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-31 www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A E301J1ABE2 Horizontal Actuation 3PDT PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages H-28 and H-30. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH Actuator Shown In Pos. 1 SECTION A-A E101J1AV2BE2 Vertical Actuation SPDT AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING Rocker NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages H-28 and H-30. H H-32 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH E201J1AV2BE2 Vertical Actuation DPDT SECTION A-A Actuator Shown In Pos. 1 AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages H-28 and H-30. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH E301J1AV2BE2 Vertical Actuation 3PDT Actuator Shown In Pos. 1 SECTION A-A AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING Rocker NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages H-28 and H-30. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-33 www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A E101J1V5BE2 Vertical Actuation SPDT NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages H-28 and H-30. V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH PC MOUNTING SECTION A-A Actuator Shown In Pos. 1 E201J1V5BE2 Vertical Actuation DPDT NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages H-28 and H-30. Rocker H H-34 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS V6, V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING OPTION CODE DIM `A' .555 (14, 10) .460 (11, 68) .630 (16, 00) .953 (24, 21) E101J1__BE2 SPDT V21 V6 V7 V8 NOTE: Available actuators, see pages H-28 and H-30. V6, V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING OPTION CODE DIM `A' .555 (14, 10) .460 (11, 68) .630 (16, 00) .953 (24, 21) E201J1__BE2 DPDT V21 V6 V7 V8 NOTE: Available actuators, see pages H-28 and H-30. V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Rocker E301J1__BE2 3PDT OPTION CODE DIM `A' .555 (14, 10) .630 (16, 00) .953 (24, 21) V21 V7 V8 NOTE: Available actuators, see pages H-28 and H-30. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-35 www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS V3, V4 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E101J1__BE2 SPDT OPTION CODE DIM `A' .460 (11,68) .630 (16,00) V3, V31 V4 NOTE: Available actuators, see pages H-28 and H-30. V3, V4 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E201J1__BE2 DPDT OPTION CODE DIM `A' .460 (11,68) .630 (16,00) V3, V31 V4 NOTE: Available actuators, see pages H-28 and H-30. V4 VERTICAL MOUNT, V-BRACKET VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Rocker E301J1__BE2 3PDT OPTION CODE DIM `A' .630 (16,00) V41 NOTE: Available actuators, see pages H-28 and H-30. H H-36 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches CONTACT MATERIAL OPTION CODE RoHS RoHS COMPLIANT * COMPATIBLE * YES NO YES YES NO YES YES NO YES YES YES YES YES YES YES YES YES YES GOLD OVER SILVER 2,3 CONTACT MATERIAL TERMINAL PLATING GOLD 1 LOW LEVEL/ DRY CIRCUIT RATINGS B K P Q M S G L R GOLD 1 TIN-LEAD 6 MATTE-TIN 7 SILVER 5 0.4 VA MAX. @ 20 V AC OR DC MAX. SILVER 4,5 TIN-LEAD 6 MATTE-TIN 7 GOLD 3 TIN-LEAD 6 MATTE-TIN 7 POWER E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. LOW LEVEL/DRY CIRCUIT OR POWER * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. 7 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with G, L, M, Q, S & R contact material. B contact material standard with all terminations. K, L , M, P R & S contact materials not available with Z terminations. SEAL E EPOXY SEAL AVAILABLE HARDWARE J2, J21 Actuators J3 Actuator J1, J11 Actuators PART NO. PART NO. PART NO. 760502263 BLACK 760503000 RED Material: Nylon Finish: Matte 766602263 BLACK 766603000 RED Material: Nylon Finish: Matte 776A02263 BLACK 776A03000 RED Material: Nylon Finish: Matte J50 Actuator J60 Actuator J90 Actuator Rocker PART NO. PART NO. PART NO. 775A02263 BLACK 775A03000 RED Material: Nylon Finish: Matte 613802263 BLACK 598103000 RED Material: Nylon Finish: Matte 598002263 BLACK 598003000 RED Material: Nylon Finish: Matte NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. Other colors available, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-37 www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches AVAILABLE HARDWARE Fits Z3 Termination female connector Frame for J11, J21 Actuators J50, J60 & J90 Actuators MATTE PART NO. PART NO. PART NO. GLOSS PART NO. 764500746 BLACK ENAMEL 764601106 RETAINING SPRING Material: Spring Steel 486702000 Material: Nylon Finish: Matte or Gloss 486802000 BLACK 530100000 Available in loose pieces. NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. Other colors available, consult Customer Service Center. Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte. TYPICAL APPLICATION J1 & J2 Actuators .047" (1,19) PANEL THK. PART NO. .062" (1,57) PANEL THK. PART NO. .090" (2,29) PANEL THK. PART NO. .125" (3,18) PANEL THK. PART NO. 452902263 452903000 452702263 452703000 452802263 452803000 452602263 BLACK 452603000 RED J50, J60 & J90 Actuators .047" (1,19) PANEL THK. PART NO. .062" (1,57) PANEL THK. PART NO. .090" (2,29) PANEL THK. PART NO. .125" (3,18) PANEL THK. PART NO. 432502263 432503000 432602263 432603000 432702263 432703000 432802263 BLACK 432803000 RED PANEL MOUNTING For part numbers 4529xxxxx, 4527xxxxx, 4528xxxxx, 4526xxxxx For part numbers 4325xxxxx, 4326xxxxx For part numbers 4327xxxxx, 4328xxxxx Rocker .005 R. MAX. (0,13) TYP. .495 - .505 (12,57 - 12,83) .005 R. .495 - .505 (0,13) (12,57 - 12,83) MAX. TYP. .005 R. (0,13) MAX. TYP. .495 - .505 (12,57 - 12,83) .797 - .803 (20,24 - 20,40) .595 - .605 (15,11 - 15,37) .620 - .625 (15,75 - 15,88) H H-38 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K E Series Sealed Miniature Rocker and Lever Handle Switches AVAILABLE HARDWARE Panel Inserts Will fit separate snap-in frames for J50, J60, J90 actuators. Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PANEL INSERT WITH HOLE FOR LED PART NO. BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO. 894902000 894903000 476602000 BLACK 476603000 RED Special colors, custom markings available, consult Customer Service Center. Rocker Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-39 www.ittcannon.com |
Price & Availability of E105J1AB222
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |